Disc Brake Proportioning Valve Kit w/Bracket and Brake Line

Item Number: BH-04036
  Be the first to review this item

Detailed Description

This Proportioning Valve Kit includes the parts needed to convert your Drum Brake Junction H-Block to a Prop Valve.

Prop Valve Kit includes the following:
Proportioning Valve w/Wiring Pigtail
Proportioning Valve Mounting Bracket
Steel H-Block to Prop Valve Conversion Line
Please select if you have Front Discs only or 4-Wheel Disc Brakes from the drop down menu. This prop valve setup mounts to the factory mounting location on the frame. The bracket and line are direct replicas of the factory original components. The proportioning valve is a high quality, aftermarket brass combination valve. The benefit of this valve is that it correctly proportions the brake fluid sent to the front and back of the Bronco. When converting to disc brakes, the calipers require more fluid to actuate than the drum wheel cylinders. If you send too much fluid to the drums, they will lock up. This valve proportions the fluid so that more fluid is sent to the calipers than the drums so that you can get full use out of your new brake setup.

Ford Part Number
Dynacorn Part Number
Scott Drake Part Number
Tomís Bronco Part Number 2625K
Wild Horses 4x4 Part Number
Dennis Carpenter Part Number