Four Wheel Power Disc Brake Conversion Kit, 10" Rear Drums

Item Number: BH-04106
  Be the first to review this item

Detailed Description

4-wheel Power Disc Brake Conversion Kits offer everything you need to convert your 66-75 Bronco to Power Disc Brakes. Our full 4 wheel disc brake kit & power brake kit makes it easy for you to order a complete upgraded power disc brake conversion kit for your early Bronco.

This Power Disc Brake Conversion Kit includes the following:
*Ultimate Power Brake Conversion Kit for 4-wheel Disc Brakes
*Disc Brake Proportioning Valve & Bracket
*Front Disc Brake Conversion Kit
*Rear Disc Brake Kit

This 4-wheel Power Disc Brake Conversion Kit is for early Broncos with factory 10'' rear drum brakes (measure inside diameter of the drums)

REQUIRES AFTERMARKET LOCKING HUBS (i.e. Warn, Mile Marker, etc). FOR EASE OF INSTALLATION, WE RECOMMEND PURCHASING NEW AXLE BEARING RETAINER PLATES. -- INSTALLING THIS POWER DISC BRAKE KIT WITH STOCK STEEL WHEELS OR SLOTTED MAGS WILL REQUIRE SPACERS FOR CLEARANCE. If you have factory 5 1/2" wide wheels, you will need a 1/2" spacer along with longer axle studs. If you have factory 6" wide wheels, you will need a 1/4" spacer.

BACKING PLATE NUMBERS FOR REAR DISC BRAKE CONVERSION: It is essential for the customer to retrieve a backing plate number from the rear axle so that we can ensure you get the correct parts the first time. A photo has been supplied as to where to locate the backing plate number. These backing plate numbers are for 10" drum setups. If your number is not listed here, please look at our 11" setups to see if the number is listed there. The picture is referencing to the driver side. There is also a number located in the same position on the passenger side if driver side is unreadable.

Ford Part Number
Dynacorn Part Number
Scott Drake Part Number
Tomís Bronco Part Number 7505
Wild Horses 4x4 Part Number
Dennis Carpenter Part Number