Front Disc Brake Conversion Kit for 66-75 Ford Broncos can't be beat. These front disc brakes conversions are made with ALL NEW PARTS! Stop brake pull or fading brakes when they're wet. Originally, the Ford Bronco came with drum brakes on all four wheels from 1966 to 1975. While drum brakes are commonly used even today in many applications, they pose serious risks when braking, especially under extreme conditions. Drum brakes have a tendency to lock up when too much pressure is applied to the brake pedal causing your Bronco to skid out of control or pull hard to one side. With Disc Brakes in the Bronco this issue is resolved as disc brake calipers don't tend to lock up like their drum brake counterparts. Another issue found in drum brake setups is that when water catches inside the drum assembly it can cause the brakes to slip or not catch at all. Disc Brakes also eliminate this issue because the brake pads are not enclosed in a drum so the moisture won't pool up to cause this issue. These safety concerns are two of the best reasons to purchase a disc brake conversion for your early Ford Bronco. There are many more advantages to be found as well, but the point here is that disc brakes are much more desirable than drum brakes for both safety and performance.
Our Front Disc Brake Conversion Kit includes:
New Front Disc Brake Backing Plates
New Loaded Calipers for Front Disc Brake Kit
New Front Disc Brake Spindles w/Seals
New Front Disc Brake Hube & Rotor Assemblies w/Races
New BRAIDED STAINLESS STEEL Disc Brake Caliper Hoses
Installation Hardware & Insructions.
Must use Warn Locking Hubs or other aftermarket locking hub setup with this kit.
If you need the proportioning valve and bracket select Disc Brakes Kit w/Prop Valve and Bracket.
This kit will clear MOST 15" wheels.
Ford Part Number
Dynacorn Part Number
Scott Drake Part Number
Tomís Bronco Part Number 2430
Wild Horses 4x4 Part Number
Dennis Carpenter Part Number